Degrease HD
1 × $50.99 Subtotal: $50.99
Description:
PC Cleanse is most effective as an alkaline building restoration and concrete cleaner, and is perfect for use on driveways, dumpster pads, restaurant drive-thru’s, and gas station surfaces. When used on concrete, PC Cleanse will remove carbon, oil, tire and other stains. It will brighten the concrete following removal of soils, giving a fresh look. Pair with Pronto Clean MS for full restoration of masonry surfaces.
PC Cleanse can be used with a pressure washer, brush or low-pressure sprayer application using either hot or cold water. Protect adjacent and surrounding surfaces not intended to be cleaned.
Directions for Use:
➤ Application instructions are available under the Application tab below.
Depending on the intended end use dilution rate, distributors will often make 2drums from this super concentrate before sale to the end user. PC Cleanse doesn't mix with bleach. Do not allow product to dry on a hot surface. Water pre-treatment is generally not necessary. Test a small surface prior to cleaning to determine compatibility before broad based use. Always test chemical in an “out-of-the-way” area. Allow surface to dry thoroughly before evaluating final appearance and results.
For Brushless Cleaning: Use PC Cleanse with two quick applications, which should lead to complete soil release. For brushless rinsing use no less than 1,000 psi. Craftsmanship determines the appropriate pressures for rinsing. When cleaning with pressure washers, set the metering valve at de-sired dilution rate, and apply cleaning solution from the bottom up on a dry sur-face. Always detail clean from the bottom up and rinse from the top down. Dilutions will vary based on the severity of the stain and type of surface. With hot water, product can be diluted further than with cold water.
Heavy oil stains, stained wood–1:1 to 1:2
Medium soil, lighter oil stains-1:3 to 1:10
Light soil / general degreasing-1:11 to 1:20
Coverage rates will vary from 100-250 sq. ft. per gallon depending on the sur-face porosity, texture and severity of staining.
Depending on the intended end use dilution rate, distributors will often make 2drums from this super concentrate before sale to the end user. PC Cleanse doesn't mix with bleach. Do not allow product to dry on a hot surface. Water pre-treatment is generally not necessary. Test a small surface prior to cleaning to determine compatibility before broad based use. Always test chemical in an “out-of-the-way” area. Allow surface to dry thoroughly before evaluating final appearance and results.
For Brushless Cleaning: Use PC Cleanse with two quick applications, which should lead to complete soil release. For brushless rinsing use no less than 1,000 psi. Craftsmanship determines the appropriate pressures for rinsing. When cleaning with pressure washers, set the metering valve at de-sired dilution rate, and apply cleaning solution from the bottom up on a dry sur-face. Always detail clean from the bottom up and rinse from the top down. Dilutions will vary based on the severity of the stain and type of surface. With hot water, product can be diluted further than with cold water.
Heavy oil stains, stained wood–1:1 to 1:2
Medium soil, lighter oil stains-1:3 to 1:10
Light soil / general degreasing-1:11 to 1:20
Coverage rates will vary from 100-250 sq. ft. per gallon depending on the sur-face porosity, texture and severity of staining.
